![]() ![]() Some time it very quick, nut still slows me down, other times its a killer and stays on for a-second or so. With the bolts in place it turns out the cable holes are not in the greatest positions but some sticky tape to put keep them where you want them before you mount the shifter should do the trick. While Im racing the E brake light keeps flashing. I have used 4x 13 metal washers to reinforce this (8.4mm hole, 30mm diameter), with 4x M6x30 bolts through them. Got a bit more travel and better feel i think. The foam bit has a hole through it that fits on the load-cell pin. So I took the foam bit from the non-load cell brake pedal and replaced one of the rubber ones on the load cell brake with the foam bit. ![]() However, every time I press the break pedal real hard and click 'set max' it doesnt really set the max to the current pressure. I just got the load-cell pedal yesterday and I thought it was very stiff with little travel. There are cable holes for the shifter (rear) and handbrake (right) cables, they can both exit on the left so you can then guide them along the seat. Changing the calibration in iRacing didnt change a thing so I went to the Fanatec settings to set the maximum breaking pressure. Again the PTFE Spray sorted it like a dream. This week my accelerator was being erratic, jumping all over the place under half acceleration, spiking up when my foot was still. With this spacer plate you can mount this combination fine on your Lite seat. since I started using WD-40 specialist High Performance PTFE Spray Lubricant I’ve not had a problem. Available at a sale price of £176.00, this handbrake is designed to enhance muscle memory, enabling you to perfect those challenging hairpin turns and drifts with unmatched precision. The bottom of the handbrake is then slightly below the bottom of the shifter so it's hitting the mounting plate and you can't move the shifter into the right position. The Sim-Lab XB1 Loadcell Handbrake is an advanced sim racing accessory designed to revolutionize your in-game driving experience. While the shifter mount plate on the Next Level Racing GT Lite and F-GT Lite racing chairs is compatible with the Fanatec shifter, it doesn't actually fit if you mount the hand brake to it. I have my Fanatec Handbrake (1.5) mounted to the side of my Fanatec Clubsport Shifter (SQ 1.5). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |